Add verify/reset EEPROM code

reset_eeprom/src/main.cpp

@@ -0,0 +1,78 @@
+/*
+ * EEPROM Clear
+ *
+ * Sets all of the bytes of the EEPROM to 0.
+ * Please see eeprom_iteration for a more in depth
+ * look at how to traverse the EEPROM.
+ *
+ * This example code is in the public domain.
+ */
+
+#include "Arduino.h"
+//#include <EEPROM.h>
+#include "Wire.h"
+
+#define EEPROMDEVICEADDRESS    0x50
+#define EEPROMSIZE             2048
+
+
+void writeEEPROM(unsigned int eeaddress, byte data )
+{
+  Wire.beginTransmission(EEPROMDEVICEADDRESS);
+  Wire.write((int)(eeaddress >> 8));   // MSB
+  Wire.write((int)(eeaddress & 0xFF)); // LSB
+  Wire.write(data);
+  Wire.endTransmission();
+
+  delay(5);
+}
+
+byte readEEPROM(unsigned int eeaddress )
+{
+  byte rdata = 0xFF;
+
+  Wire.beginTransmission(EEPROMDEVICEADDRESS);
+  Wire.write((int)(eeaddress >> 8));   // MSB
+  Wire.write((int)(eeaddress & 0xFF)); // LSB
+  Wire.endTransmission();
+
+  Wire.requestFrom(EEPROMDEVICEADDRESS,1);
+
+  if (Wire.available()) rdata = Wire.read();
+
+  return rdata;
+}
+
+void setup() {
+  // initialize the LED pin as an output.
+  pinMode(13, OUTPUT);
+  Serial.begin(115200);
+
+  /***
+    Iterate through each byte of the EEPROM storage.
+    Larger AVR processors have larger EEPROM sizes, E.g:
+    - Arduino Duemilanove: 512 B EEPROM storage.
+    - Arduino Uno:         1 kB EEPROM storage.
+    - Arduino Mega:        4 kB EEPROM storage.
+    Rather than hard-coding the length, you should use the pre-provided length function.
+    This will make your code portable to all AVR processors.
+  ***/
+
+  delay(1000);
+  Serial.println("BEGIN");
+
+  for (int i = 0 ; i < EEPROMSIZE ; i++) {
+    // writeEEPROM(i, 0xFF);
+    Serial.print(readEEPROM(i),HEX);
+  }
+
+  // turn the LED on when we're done
+  digitalWrite(13, HIGH);
+
+  Serial.println("");
+  Serial.println("END");
+}
+
+void loop() {
+  /** Empty loop. **/
+}